Electrical Panel Upgrades in Queen Creek and the East Valley
A panel upgrade replaces an outdated, full, or undersized electrical panel so your home can safely run today’s loads, like AC and EV chargers. Henderson’s Electric Solutions, an electrical contractor based in Queen Creek, AZ (led by licensed electrician Randy Henderson, ROC CR-11 #341452), assesses your home, pulls the permit, schedules SRP or APS, and installs the panel.
Quick Facts
- Service area: Queen Creek and the Phoenix East Valley
- License: Arizona ROC CR-11 #341452, held by licensed electrician Randy Henderson; bonded & insured
- Hours: Monday–Friday, 6am–6pm; emergency-only service on weekends (after-hours service call fee applies)
- Phone: (480) 430-2775
- Permits: Pulled by Henderson’s where required
- Utilities: We coordinate with SRP or APS on panel and service work, including disconnects and reconnects
How do I know if I need a panel upgrade?
You probably need one if breakers trip often, lights dim when big appliances start, or there’s no space left for new circuits. A panel that’s rusted, scorched, buzzing, or warm to the touch needs attention right away.
- Breakers that trip when the AC, dryer, or oven runs
- Lights that flicker or dim when large appliances start
- No open breaker spaces, or a panel packed with tandem breakers
- Rust, scorch marks, buzzing, or heat at the panel
- An older or recalled panel brand flagged in a home inspection
- Plans for a big new load: an EV charger, pool or spa, shop, remodel, or addition
What is involved in a panel upgrade?
A panel upgrade follows five steps, from assessment to final inspection. Here’s what to expect:
- Assessment: We inspect your panel, service equipment, and grounding, and run a load calculation.
- Written estimate: You get a clear scope and transparent pricing before any work begins.
- Permit and utility scheduling: We pull the permit and schedule the SRP or APS disconnect and reconnect.
- Installation: We install the new panel, usually Square D or Eaton, chosen to fit your home’s needs, and label every circuit.
- Inspection and walkthrough: After inspection, we show you the new panel and answer your questions.
How much does a panel upgrade cost?
The cost depends on your home, so we give you a written estimate after we see your existing panel. We don’t guess at prices sight unseen.
- Whether your service size needs to increase or stay the same
- The panel’s location and the condition of the existing equipment
- Meter, grounding, or clearance work required by code or your utility
- Any new circuits you want added at the same time
How long will my power be off during a panel upgrade?
The outage depends on the scope of the job and on utility scheduling. We’ll give you a timeline with your estimate so you can plan around it.
Because we coordinate the disconnect and reconnect with SRP or APS, you won’t have to call the utility yourself.
Do I need a bigger panel or just a new one?
Not every upgrade means more amps. Depending on your load calculation, the right answer might be a larger service, a same-size panel with room to grow, or a subpanel for a garage or shop.
We’ll explain the options in plain language so you can choose with confidence.
Do newer homes need panel upgrades too?
Yes, sometimes. Many East Valley homes built in the 1990s and 2000s now have every space filled after years of added loads.
Older homes in Mesa, Chandler, and Florence may have original equipment near the end of its life. If the wiring is aging too, we’ll check whether a whole-home rewire makes sense.
Why choose Henderson’s Electric Solutions?
Licensed and accountable
- Led by licensed electrician Randy Henderson, Arizona ROC CR-11 #341452
- Team includes apprentices
- Bonded & insured
- BBB Accredited since November 2025, rated A+
Family-owned and local
- Owned by Randy and Tori Henderson
- Founded in 2022, based in Queen Creek
- 300+ satisfied customers
Solutions Only – No Excuses
We treat the most important equipment in your home with the care it deserves.
Frequently asked questions
Do SRP and APS have rules for panel and meter equipment?
Yes. Both SRP and APS publish service requirements covering meter sockets, clearances, and service equipment. Your upgrade has to meet those rules and local code, and Henderson’s schedules the utility disconnect and reconnect for you.
Do I need a permit to upgrade my electrical panel?
In most cases, yes. Panel replacements and service upgrades typically need a permit and inspection from your town, city, or county, and Henderson’s pulls the permit where one is required.
What panel brands do you install?
We usually install Square D or Eaton panels. The right choice depends on your home and your needs, and we’ll explain our recommendation.
Will I need a panel upgrade to add an EV charger?
Not always. A load calculation shows whether your current panel can support a charger, and sometimes a right-sized circuit or a load-management device avoids a full upgrade.
Will a new panel fix my flickering lights?
Sometimes. Flickering can come from a failing panel, but also from loose connections, a bad fixture, or a utility issue, so we diagnose the cause before recommending a new panel.
Is your panel ready for what’s next?
Let’s take a look and give you an honest recommendation. Call (480) 430-2775, email info@hendersonselectric.com, or request an estimate online.